Service Data
SFI (2RZ-FE, 3RZ-FE) SPECIFICATIONS
| Fuel pressure regulator | Fuel pressure | at no vacuum | 265 - 304 kPa (2.7 -3.1 kgf/cm2 , 38 - 44 psi) |
| Fuel pump | Resistance | at 20°C (68°F) | 0.2 - 3.0 Ω |
| Injector | Resistance | at 20°C (68°F) | 12 - 16 Ω |
| Injection volume | 71 - 86 cm3 (4.3 - 5.3 cu in.) per 15 seconds | ||
| Difference between each cylinder | 15 cm3 (1.0 cu in.) or less | ||
| Fuel leakage | 1 drop or less per 12 minutes | ||
| MAF meter | Resistance (THA - E3) | at - 20°C (- 4°F) | 10 - 20 kΩ |
| at 0°C (32°F) | 4 - 7kΩ | ||
| at 20°C (68°F) | 2 - 3 kΩ | ||
| at 40°C (104°F) | 0.9 - 1.3 kΩ | ||
| at 60°C (140°F) | 0.4 - 0.7 kΩ | ||
| at 80°C (176°F) | 0.2 - 0.4 kΩ | ||
| Throttle body | Throttle valve fully closed angle | 6° | |
| Throttle opener setting speed | 1,200 - 1,500 rpm | ||
| Throttle position sensor | Clearance between stop screw and lever | ||
| 0 mm (0 in.) | VTA - E2 | 0.2 - 5.7 kΩ | |
| Throttle valve fully open | VTA - E2 | 2.0 - 10.2 kΩ | |
| VC - E2 | 2.5 - 5.9 kΩ | ||
| IAC valve | Resistance (+B - RSC or RSO) | at cold | 17.0 - 24.5 Ω |
| at hot | 21.5 - 28.5 Ω | ||
| ECT sensor | Resistance | at - 20°C (-4°F) | 10 - 20 kΩ |
| at 0°C (32°F) | 4 - 7 kΩ | ||
| at 20°C (68°F) | 2 - 3 kΩ | ||
| at 40°C (104°F) | 0.9 - 1.3 kΩ | ||
| at 60°C (140°F) | 0.4 - 0.7 kΩ | ||
| at 80°C (176°F) | 0.2 - 0.4 kΩ | ||
| Vapor pressure sensor | Power source voltage | 4.5 - 5.5 V | |
| VSV for EVAP | Resistance | at 20°C (68°F) | 30 - 34 Ω |
| VSV for CCV | Resistance | at 20°C (68°F) | 25 - 30 Ω |
| at 120°C (248°F) | 33 - 42 Ω | ||
| VSV for pressure switching valve | Resistance | at 20°C (68°F) | 30 - 36 Ω |
| VSV for vapor pressure sensor | Resistance | at 20°C (68°F) | 37 - 44 Ω |
| VSV for EGR | Resistance | at 20°C (68°F) | 33 - 39 Ω |
| EGR gas temp. sensor | Resistance | at 50°C (122°F) | 64 - 97 kΩ |
| at 100°C (212°F) | 11 - 16 kΩ | ||
| at 150°C (302°F) | 2 - 4 kΩ | ||
| A/F sensor | Heater coil resistance | ||
| Bank 1 Sensor 1 at 20°C (68°F) | 0.8 - 1.4 Ω | ||
| at 800°C (1,472°F) | 1.8 -3.2 Ω | ||
| Heated oxygen sensor | Heater coil resistance | ||
| Bank 1 Sensor 1 at 20°C (68°F) | 11 - 16Ω | ||
| Bank 1 Sensor 2 at 20°C (68°F) | 11 - 16Ω | ||
| Fuel cut RPM | Fuel return rpm | M/T | 1,400 rpm |
| A/T | 1,500 rpm | ||