Torque Specifications

Part tightened		N.m	kgf.cm	ft.lbf
TILT STEERING COLUMN
Steering wheel pad set screw (Torx screw)		8.8	90	78 in..lbf
Steering wheel set nut		50	510	37
Control valve shaft x No. 2 intermediate shaft assembly		35	360	26
No. 2 intermediate shaft assembly x No. 2 universal joint assembly		35	360	26
No. 2 universal joint assembly x Main shaft assembly		35	360	26
Steering column assembly set nut		26	260	19
Column hole cover No. 2 set bolt		8.0	82	71 in..lbf
Shift lever set bolt		18	180	13
Shift lever housing x Column housing support		12	120	9
Turn signal bracket x Steering column housing		7.5	75	65 in..lbf
Tilt lever lock shaft		9.0	90	78 in..lbf
PS VANE PUMP
Union bolt x Pressure feed tube		46.5	475	34
PS vane pump assembly set stud bolt		22	220	16
PS vane pump assembly set bolt and nut		44	450	33
Suction port union set bolt		13	130	9
Pressure port union		83	850	61
Front housing x Rear housing		24	240	17
PS GEAR
Turn pressure tube union nut		13 (15)	135 (150)	10 (11)
Tie rod end lock nut		55	560	41
Rack x Rack end		76 (103)	770 (1,050)	56 (76)
Rack guide spring cap lock nut		44 (59)	450 (600)	32 (43)
Rack housing cap		59	600	43
Self-locking nut		25	250	18
Control valve housing set bolt		18	185	13
PS gear assembly set bolt		165	1,700	123
PS gear assembly set bolt and nut		130	1,350	96
Bracket x Body	Bolt and nut	165	1,700	123
Bracket x Body	Stud bolt	20	200	15
Pressure feed and return tubes x Control valve housing		22 (25)	227 (250)	16 (18)
No. 2 intermediate shaft assembly x No. 2 universal joint assembly		35	360	26
Control valve shaft x No. 2 intermediate shaft assembly		35	360	26
Tie rod end x Lower arm		91	930	67