LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Power Mirror Control System >> Inspection

Power Mirror Control System: Inspection

  1. w/o Retract Mirror 
    1. Left Side: 
    2. INSPECT MIRROR SWITCH INSPECTION 
    MIRROR SWITCH CONTINUITY INSPECTION

    Switch Position Tester Connection Specified Condition
    OFF - No Continuity
    UP 4-8, 6-7 Continuity
    DOWN 4-7, 6-8 Continuity
    LEFT 5-8, 6-7 Continuity
    RIGHT 5-7, 6-8 Continuity
  2. Right Side: 
    1. INSPECTION MIRROR SWITCH INSPECTION 
    MIRROR SWITCH CONTINUITY INSPECTION

    Switch Position Tester Connection Specified Condition
    OFF - No Continuity
    UP 3-8, 6-7 Continuity
    DOWN 3-7, 6-8 Continuity
    LEFT 2-8, 6-8 Continuity
    RIGHT 2-7, 6-8 Continuity

    If continuity is not as specified, replace the switch.

    Fig 1: Identifying Power Mirror Control Switch (W/O Retract Mirror)
    G02928155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. w/ Retract Mirror 
    1. Left Side: 
    2. INSPECT MIRROR SWITCH INSPECTION 
    MIRROR SWITCH CONTINUITY INSPECTION

    Switch Position Tester Connection Specified Condition
    OFF - No Continuity
    UP 4-8, 6-7 Continuity
    DOWN 4-7, 6-8 Continuity
    LEFT 5-8, 6-7 Continuity
    RIGHT 5-7, 6-8 Continuity
  4. Right side: 
    1. INSPECTION MIRROR SWITCH INSPECTION 
    MIRROR SWITCH CONTINUITY INSPECTION

    Switch Position Tester Connection Specified Condition
    OFF - No Continuity
    UP 3-8, 6-7 Continuity
    DOWN 3-7, 6-8 Continuity
    LEFT 5-8, 6-7 Continuity
    RIGHT 5-7, 6-8 Continuity

    If continuity is not as specified, replace the switch.

    Fig 2: Identifying Power Mirror Switch (W/ Retract Motor)
    G02928156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECTION MIRROR SWITCH INSPECTION 
    MIRROR SWITCH CONTINUITY INSPECTION

    Switch Position Tester Connection Specified Condition
    DRIVE 7-9, 8-10 Continuity
    RETRACT 7-10, 8-9 Continuity

    If continuity is not as specified, replace the switch.

  6. w/ Retract Mirror: 
    1. INSPECT MIRROR MOTOR OPERATION 
    1. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5. Check that the mirror turns leftward.
      Fig 3: Inspecting Mirror Motor Operation (Left Ward) W/ Retract Mirror
      G02928157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Reverse the polarity, check that the mirror turns rightward.
      Fig 4: Inspecting Mirror Motor Operation (Rightward) W/ Retract Mirror
      G02928158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5. Check that the mirror turns upward.
      Fig 5: Inspecting Mirror Motor Operation (Upward) W/ Retract Mirror
      G02928159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Reverse the polarity, check that the mirror turns downward.

    If operation is not as specified, replace the mirror assembly.

    Fig 6: Inspecting Mirror Motor Operation (Down Ward) W/ Retract Mirror
    G02928160Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. w/o Retract Mirror: 
    1. INSPECT MIRROR MOTOR OPERATION 
    1. Connect the positive (+) lead from the battery to terminal 3 and negative (-) lead to terminal 1. Check that the mirror turns leftward.
      Fig 7: Inspecting Mirror Motor Operation (Left Ward) W/O Retract Mirror
      G02928161Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Reverse the polarity, check that the mirror turns rightward.
      Fig 8: Inspecting Mirror Motor Operation (Right Ward) W/O Retract Mirror
      G02928162Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1. Check that the mirror turns upward.
      Fig 9: Inspecting Mirror Motor Operation (Upward) W/O Retract Mirror
      G02928163Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Reverse the polarity, check that the mirror turns downward.

    If operation is not as specified, replace the mirror assembly.

    Fig 10: Inspecting Mirror Motor Operation (Downward) W/O Retract Mirror
    G02928164Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSPECT ELECTRICAL RETRACT MOTOR OPERATION 
    1. When driving position:
      1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, check that the mirror operations at retract position.
      2. Reverse the polarity, check that the mirror does not operate.

      If operation is not as specified, replace the mirror assembly.

    2. Between driving position and retract position:
      1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, check that the mirror operates at retract position.
      2. Reverse the polarity, check that the mirror operate at return position (Stopping at driving position).

      If operation is not as specified, replace the mirror assembly.

    3. When retract position:
      1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, check that the mirror does not operates.
      2. Reverse the polarity, check that the mirror operate at return position (Stopping at driving position).

      If operation is not as specified, replace the mirror assembly.

      Fig 11: Inspecting Electrical Retract Motor Operation
      G02928165Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals