LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch & Key Unlock Warning System >> Inspection

Ignition Switch & Key Unlock Warning System: Inspection

  1. INSPECT IGNITION SWITCH CONTINUITY 
    TESTER CONNECTION SPECIFIED CONDITION

    Switch Position Tester Connection Specified Condition
    LOCK - No Continuity
    ACC 1 - 3 Continuity
    ON 1 - 2 - 3 5 - 6 Continuity
    START 1 - 2 4 - 5 - 6 Continuity

    If continuity is not as specified, replace the switch.

    Fig 1: Identifying Ignition Switch Connector Terminals
    G02927962Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY 
    TESTER CONNECTION SPECIFIED CONDITION

    Switch Position Tester Connection Specified Condition
    OFF (Key Removed) - No Continuity
    ON (Key Set) 1 - 2 Continuity

    If continuity is not as specified, replace the switch.

    Fig 2: Inspecting Key Unlock Warning Switch Continuity
    G02927963Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals