Rear Brake Speed Sensor: Removal

1. Remove the seat cushion and rear side trim.
2. Disconnect the speed sensor connector.
Fig 1: Disconnecting Speed Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 clamp bolts holding the sensor wire harness to the body and suspension arm.

   Torque: 

   To body: 5.0 N.m (52 kgf.cm, 41 in.lbf) 

   To suspension arm: 19 N.m (194 kgf.cm, 14 ft.lbf) 

Remove the bolt and speed sensor from the axle carrier.

Torque: 8.0 N.m (82 kgf.cm, 70 in.lbf) 

Fig 2: Removing Speed Sensor & Bolt

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002