LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Air Bag Restraint Systems) >> Disposal Procedures >> Off-Vehicle Deployment >> Passenger-side AIR Bag Module

Passenger-side AIR Bag Module

WARNING: This page is about a different car, the 2002 Lexus GS 430 and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disconnect negative battery cable. Remove passenger-side air bag. See PASSENGER-SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION.
  2. Position passenger-side air bag inside a scrap tire with deployment side facing inside of tire and secure with strong wire. See Fig 1. Place this tire between 4 other tires (top tire should have wheel installed). Securely tie all tires together with wire.
  3. Connect Deployment Tools (09082-00700 and 09082-00760) to passenger-side air bag connector. Position deployment tool at least 33 feet away from passenger-side air bag. Press activation switch to deploy passenger-side air bag. Because of heat, wait 30 minutes before handling passenger-side air bag. Seal deployed air bag in vinyl bag and dispose of in usual manner.
Fig 1: Preparing Air Bag For Deployment
G98H08194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals