Power Outlet: Removal
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Look inside and note position of the retaining bosses (Figure ).
- Using external snap ring pliers with 90 degree tips. Insert pliers with tips against bosses and squeeze forcing bosses out of base.
- Pull out the base through mounting ring by gently rocking pliers. A tool can be made to do the same. Refer to (Figure ).
- Disconnect the base wires.
- Set base aside and remove base mount ring.