Speed Sensor - Input: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery negative cable.
Disconnect input speed sensor connector (Fig 1).
Unscrew and remove input speed sensor (Fig 2).
Inspect speed sensor o-ring (Figure) and replace if necessary.

Fig 1: Removing Transmission Connectors
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Identifying Input (Turbine) Speed Sensor
Courtesy of DAIMLERCHRYSLER CORP.