LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Servicing - A/T) >> Adjustments >> Shift Cable >> Land Cruiser

Land Cruiser

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota RAV4, and 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply parking brake. Loosen nut on shift lever on side of transmission. See Fig 1. Move control shaft lever fully toward rear of vehicle.
  2. Move control shaft lever 2 notches to Neutral position. Place gearshift lever to "N" position. While holding control shaft lever slightly toward Reverse position, tighten control rod nut.
  3. Start engine. Ensure vehicle moves forward when moving gearshift lever from "N" to "D" position, and rearward when shifting to "R" position.
Fig 1: Adjusting Shift Cable (Land Cruiser)
G96H19262Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002