LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Back Door Control System - Diagnostics) >> Circuit Inspection >> Luggage Room Light Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check luggage room light (See  INSPECTION  ). 
    1. NG : Replace the luggage room light. 
    2. OK : Go to Next Step 
  2. Check wire harness and connector between luggage room light and back door ECU, luggage room light and battery (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown in  PROBLEM SYMPTOMS TABLE   .