LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Instrument Panel) >> Component Tests >> Engine Coolant Temperature Receiver Gauge

Engine Coolant Temperature Receiver Gauge

WARNING: This page is about a different car, the 2003 Lexus IS 300 and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operation Inspection -  See ENGINE COOLANT TEMPERATURE GAUGE CIRCUIT  under CIRCUIT TESTS.
  2. Resistance Inspection -  Measure the resistance between terminals with fixing pointer to the stopper. See CONNECTOR IDENTIFICATION . See INSPECTING COMBINATION METER ASSEMBLY RESISTANCE  table. If resistance value is not as specified, replace the receiver gauge (this circuit includes the diode). See COMBINATION METER  under REMOVAL & INSTALLATION.
    INSPECTING COMBINATION METER ASSEMBLY RESISTANCE

    Tester Connection Resistance (Ohms)
    A - B 160
    C - D 160