LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (SFI System) >> Injector >> Removal

Section 1050 (SFI System): Injector: Removal

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT PCV HOSE 
  2. REMOVE AIR CLEANER INLET AND AIR CLEANER ASSEMBLY WITH MAF METER 
    1. Disconnect the MAF meter connector.
    2. Disconnect the VSV hose for CCV.
    3. Remove the 3 bolts and air cleaner assembly, air cleaner inlet, MAF meter together in one piece.
  3. REMOVE INJECTORS 
    1. Disconnect the 4 injector connectors.
    2. Remove the 2 bolts holding the delivery pipe to the cylinder head.
      3. Fig 1: Disconnecting Injector Connectors & Removing Bolts
      G02639413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the delivery pipe together with the 4 injectors from the cylinder head.
      NOTE: Be careful not to drop the injectors when disconnecting the delivery pipe.
    4. Remove the 2 spacers and 4 grommets.
    5. Pull out the 4 injectors from the delivery pipe.
    6. Remove the O-ring from each injector.
scientia non olet · About LEMON Manuals