LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Electronic Control Modules) >> Door Module >> Installation

Door Module: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the door module onto the front door trim panel.
  2. Install the door module to the back of the front door trim panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Install the trim panel onto the front door (Refer to TRIM PANEL ).
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals