VVT Sensor: Replacement

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

A bolt without torque specification is a standard bolt (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

REMOVE AIR CLEANER INLET ASSY
REMOVE AIR CLEANER ASSY (See REPLACEMENT )
REMOVE VVT SENSOR
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
  
  Fig 1: Removing VVT Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR
1. Apply a light coat of engine oil to the O-ring on the sensor.
2. Install the sensor with the bolt.
  Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
3. Connect the sensor connector.
INSTALL AIR CLEANER ASSY (See REPLACEMENT )
INSTALL AIR CLEANER INLET ASSY
CHECK CONNECTION OF VACUUM HOSE