Section 983 (Exhaust Gas RECIRCULATION System): Tube: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect rubber silicone seals on intake manifold end of EGR tube.
- Install upper tube into the intake manifold (Figure ), being careful that the silicone rubber seals are correctly installed and undamaged (Fig 1 ).
- Tighten the EGR upper tube to EGR valve bolts to 11 N.m (95 in. lbs.) torque (Figure ).
- Install the EGR tube bracket bolt and tighten (Figure ).