LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Seat System) >> First Row Seat Riser >> Installation

First Row Seat Riser: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seat base into position on first seat assembly.
  2. Install four nuts attaching seat base to seat assembly (Figure ).
  3. Place seat into position.
  4. Connect heating element wire harness.
  5. Install first row seat. (Refer to INSTALLATION  ).
  6. Install headrest. (Refer to INSTALLATION  ).
  7. Disconnect and isolate the battery negative cable.
scientia non olet · About LEMON Manuals