Frame Closeout Molding: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

Lower door window glass.
Place door frame close out molding into position (Fig 1 ).
Starting at B-pillar to corner and work along leader to A-pillar belt line. Snapping molding into place, using hand pressure.
Finish inserting molding along B-pillar side of door.
Raise door window glass.
Install door inner belt molding weatherstrip. Refer to FRONT INNER BELT MOLDING WEATHERSTRIP ).

Fig 1: Removing Frame Close Out Molding
Courtesy of DAIMLERCHRYSLER CORP.
Install front door trim panel. (Refer to INSTALLATION ).