Cd/DVD Changer: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Reconnect the wire connector to the CD/DVD changer.
- Insert the. CD/DVD changer into the instrument panel.NOTE: Use care when inserting CD/DVD changer so that cable is not pinched or trapped against instrument panel.
- Install CD/DVD) changer mounting fasteners, Tighten to 2 N.m (22 in. lbs.).
- Install instrument panel center bezel (Refer to INSTRUMENT PANEL CENTER BEZEL ).
- Connect the battery negative cable.