Oil Pump: Reassembly

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL OIL PUMP BODY COVER
Install the pump body cover with the 5 bolts.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

Fig 1: Installing Oil Pump Body Cover With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RELIEF VALVE
1. Coat the relief valve with engine oil.
2. Insert the relief valve and spring into the pump body hole.
3. Using a socket wrench (27 mm), install the plug.
  Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
INSTALL OIL PUMP STRAINER SET
1. Place a new gasket on the oil pump.
2. Install the oil strainer with the 2 nuts.
  Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
  
  Fig 3: Installing Oil Pump Strainer & Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002