Section 341 (Wheel Alignment Specifications & Adjustment Procedures): Description: Camber
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
Camber is inward or outward tilt of top of tire and wheel assembly. See Fig 1 . Camber is measured in degrees of angle relative to a true vertical line. Camber is a tire wearing angle and can cause the following wear:
- Excessive negative camber will cause tread wear on inside of tire.
- Excessive positive camber will cause tread wear on outside of tire.