LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Steering Column Switches) >> Circuit Tests >> Turn Signal Switch Circuit >> Connector Disconnected

Connector Disconnected

WARNING: This page is about a different car, the 2003 Lexus IS 300 and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connector from combination switch and backprobe on wiring harness side. See Figure. See INSPECTING TURN SIGNAL SWITCH CIRCUIT (CONNECTOR DISCONNECTED)  table. If continuity is not as specified, replace switch. See COMBINATION SWITCH  under REMOVAL & INSTALLATION.

INSPECTING TURN SIGNAL SWITCH CIRCUIT (CONNECTOR DISCONNECTED)

Tester Connection Condition Specified Condition
2 - Ground Constant Continuity