Master Cylinder
WARNING: This page is about a different car, the 2004 Lexus IS 300, 2003 Lexus IS 300, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder.
- Remove the air cleaner assembly with hose.
- Disconnect the brake lines from the master cylinder with special tool (09023-00100).
- Slowly depress the brake pedal and hold it.
- Block off the outer holes with your fingers and release the brake pedal.
- Repeat steps 3 and 4 several times.
- Connect the brake lines and install the air cleaner assembly with hose. Bleed brake lines. See BRAKE LINE .
- Check the fluid level in reservoir and add fluid if necessary.