Wheel Speed Sensor (Front): Removal
WARNING: This page is about a different car, the 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove front wheel, engine under cover and fender liner.
- Disconnect speed sensor harness connector. See Fig 1.
- Disconnect harness clamp.
- Remove resin clip and 2 clamp bolts holding sensor harness to body.
- Remove bolt and speed sensor from steering knuckle. See Fig 2.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002