LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Anti-Lock) >> Removal & Installation >> Brake Actuator Assembly >> Installation

Brake Actuator Assembly: Installation

WARNING: This page is about a different car, the 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Install 3 cushions and 2 cushion bolts to brake actuator. Install brake actuator to bracket with 2 nuts and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Install nut, 2 bolts and brake actuator assembly. Tighten to specification. See TORQUE SPECIFICATIONS .
  3. Connect brake hose and connector.
  4. Using special tool (09023-00100), connect 6 brake lines to actuator and tighten to specification. See TORQUE SPECIFICATIONS .
  5. Fill reservoir with brake fluid and bleed brake system. See BLEEDING BRAKE SYSTEM .
  6. Check for brake fluid leakage.
scientia non olet · About LEMON Manuals