Master Cylinder
WARNING: This page is about a different car, the 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If master cylinder has been disassembled or if reservoir becomes empty, bleed air from master cylinder.
- Using special tool (09751-36011), disconnect brake lines from master cylinder.
- Have a helper slowly depress brake pedal and hold it.
- Block off outer holes with your fingers and release brake pedal.
- Repeat 2 and 3 several times.
- Connect brake lines. Bleed brake lines. See BRAKE LINE .
- Check fluid level in reservoir and add fluid if necessary.