LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> MR2 C56 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control (SFI) System >> Throttle Body (M/T) >> Installation

Throttle Body (M/T): Installation

  1. INSTALL THROTTLE BODY 
    1. Install 2 new gaskets to the intake manifold as shown in the illustration.
    2. Install the accelerator cable bracket to the throttle body with the 2 bolts.
      Fig 1: Installing Gaskets To Intake Manifold
      G02631041Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the throttle body with the 2 bolts and 2 nuts.

      Torque: 30 N.m (306 kgf.cm, 22 ft.lbf) 

    4. Connect the 2 water bypass hoses to the throttle body.
      Fig 2: Installing Throttle Body With Bolts And Nuts
      G02631042Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Connect the IAC valve connector.
    6. Connect the throttle position sensor connector.
    7. Connect the PCV hose to the throttle body.
  2. CONNECT ACCELERATOR CABLE 
  3. INSTALL AIR CLEANER HOSE 
  4. INSTALL VSV FOR EVAP 
  5. INSTALL SUSPENSION UPPER BRACE 
  6. FILL RADIATOR WITH ENGINE COOLANT 
    Fig 3: Connecting PCV Hose To Throttle Body
    G02631043Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals