Torque Specifications: 2AZ-FE
2AZ-FE Starting & Charging Torque Specifications
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Starter assy | ||||
| Starter assy x Engine | 37 | 377 | 27 | |
| Starter wire x Terminal 30 of starter | 9.8 | 100 | 7.0 | |
| Starter drive housing assy x Magnet switch assy | 7.5 | 76 | 66 in..lbf | |
| Starter commutator end frame assy x Starter drive housing assy | 6.0 | 61 | 53 in..lbf | |
| Lead wire of starter yoke x Terminal C of magnet switch assy | 10 | 102 | 7.0 | |
| Battery clamp x Battery clamp bolt | 5.5 | 56 | 49 in..lbf | |
| Cable x Battery terminal | 3.5 | 36 | 31 in..lbf | |
| Generator assy (100A) | ||||
| Generator assy x Engine | M8 | 21 | 214 | 15 |
| M10 | 52 | 530 | 38 | |
| Generator wire x Generator assy | 9.8 | 100 | 7.0 | |
| Generator rectifier end frame x Drive end frame assy | 5.8 | 59 | 51 in..lbf | |
| Generator brush holder assy x Generator rectifier end frame | 1.8 | 18 | 16 in..lbf | |
| Generator rear end cover x Generator rectifier end frame | 4.6 | 47 | 41 in..lbf | |
| Retainer plate x Drive end frame assy generator | 2.3 | 23 | 20 in..lbf | |
| Generator pulley x Generator rotor assy | 110 | 1,122 | 81 | |
| Generator assy (130A) | ||||
| Generator assy x Engine | M8 | 21 | 214 | 15 |
| M10 | 52 | 530 | 38 | |
| Generator wire x Generator assy | 9.8 | 100 | 7.0 | |
| Generator rectifier end frame x Drive end frame assy | 5.8 | 59 | 51 in..lbf | |
| Generator brush holder assy x Generator rectifier end frame | 1.8 | 18 | 16 in..lbf | |
| Generator rear end cover x Generator rectifier end frame | 4.6 | 47 | 41 in..lbf | |
| Retainer plate x Drive end frame assy generator | 2.3 | 23 | 20 in..lbf | |
| Generator pulley x Generator rotor assy | 110 | 1,122 | 81 | |