Section 373 (Engine Ignition System): Removal

WARNING: This page is about a different car, the 2004 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 2 CYLINDER HEAD COVER
REMOVE IGNITION COILS (WITH IGNITER) FROM SPARK PLUGS
1. Remove the 2 bolts and disconnect the wire harness protector.
2. Disconnect the 4 ignition coil connectors.
3. Remove the 4 bolts and pull out the 4 ignition coils (with igniter).
  1. Torque: 9.0 N.m (92 kgf.cm, 79 in..lbf)
    
    Fig 1: Removing Ignition Coils (With Igniter) From Spark Plugs
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002