LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Camry XLE, 2.4 E >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Inspection

Horn System: Inspection

  1. INSPECT RELAY (HORN) 
    1. Remove the HORN relay from the engine room R/B.
    2. Check the HORN relay resistance.

      Standard: 

      TESTER CONNECTION REFERENCE CHART

      Tester Connection Specified Condition
      3 - 5 1 kΩ or higher
      3 - 5 Below 1Ω (When battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: Identifying Horn Relay Terminals
      G02891040Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals