Ignition Switch
- Disconnect the battery negative terminal.
- Remove the instrument panel finish lower panel left side. See Fig 1.
- Using a screwdriver, open the cover of the instrument panel finish lower panel left side.
- Remove the bolt "D" and screws "H". See Fig 1.
- Disconnect the hood lock control cable.
- Disengage the 4 clips. See Fig 1 and remove the instrument panel finish lower panel left side.
- Disconnect the connectors.
NOTE: Place tape on screwdriver tip to avoid damage. - Remove ignition switch.
- Disconnect the ignition switch connector and unlock switch connector.
- Remove clamp.
- Remove the 2 screws and ignition switch.