Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Brush Length | ||||||
| Standard | ||||||
| 2003 | .374-.453 Inches (9.5-11.5 mm) | |||||
| 2004 | .177-.413 Inches (4.5-10.5 mm) | |||||
| Limit (Minimum) | More Than .059" (1.5 mm) | |||||
| Rotor | ||||||
| Resistance (1) | ||||||
| 2003 | 2.1-2.5 ohms | |||||
| 2004 | 2.3-2.7 ohms | |||||
| Slip Ring Diameter | ||||||
| Standard | ||||||
| 2003 | .559-.567 Inches (14.2-14.4 mm) | |||||
| 2004 | .551-.567 Inches (14.0-14.4 mm) | |||||
| Minimum | .504 Inches (12.8 mm) | |||||
| Generator Regulated Output | ||||||
| Amperage | ||||||
| Without Load | 10 Or Less Amps | |||||
| With Load | 30 Or More Amps | |||||
| Voltage | 13.2-14.8 Volts | |||||
|
||||||