Service Specifications

AUTOMATIC AIR CONDITIONING SPECIFICATIONS

Application

Specification

Compressor Type

⁽¹⁾

Compressor Belt Tension ⁽²⁾

2.4L 4-Cyl.

⁽³⁾

3.0L & 3.3L V6

New Belt

138-192 lbs. (63-87 kg)

Used Belt ⁽⁴⁾

66-110 lbs. (30-50 kg)

Compressor Oil Capacity ⁽⁵⁾

4.1-4.6 ozs.

Condenser Oil Capacity ⁽⁵⁾

⁽¹⁾

Evaporator Oil Capacity ⁽⁵⁾

⁽¹⁾

Receiver Oil Capacity ⁽⁵⁾

⁽¹⁾

Refrigerant (R-134a) Capacity

17.6-21.1 ozs.

System Operating Pressures ⁽⁶⁾

High Side

199-228 psi (14-16 kg/cm² )

Low Side

21-36 psi (1.5-2.5 kg/cm² )

⁽¹⁾	Information is not available from manufacturer.

⁽²⁾	Use belt tension gauge for checking compressor belt tension.

⁽³⁾	Automatic belt tensioner is used. Adjustment is not required.

⁽⁴⁾	Used belt is a belt that has been in operation at least 5 minutes.

⁽⁵⁾	Use ND-OIL 8 refrigerant oil or equivalent.

⁽⁶⁾	With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 1500 RPM, blower switch in HI position and temperature control dial in COOL or MAX COOL position.