Ignition Switch/Starter Switch Assembly: Inspection

INSPECT IGNITION OR STARTER SWITCH ASSY

Inspect the ignition switch continuity.
Standard:

TESTER CONNECTION CONDITION CHART

Switch position	Tester connection	Specified condition
LOCK	-	No continuity
ACC	2 <--> 3	Continuity
ON	2 <--> 3 <--> 4 6 <--> 7	Continuity
START	1 <--> 2 <--> 4 6 <--> 7 <--> 8	Continuity

If the continuity is not as specified, replace the switch.

Fig 1: Inspecting Ignition Or Starter Switch Assembly

G02891383

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002