How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures in the following.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND PROBLEM SYMPTOM 
3. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
   1. Without an applicable problem symptom table, proceed to A.
   2. With an applicable problem symptom table, proceed to B.

   B: Go to step   5 

   A: Go To Next Step 

4. PERFORM TROUBLESHOOTING BY FOLLOWING METHOD, DEPENDING ON MALFUNCTION SYMPTOM 
   1. Pre-check (See PRE-CHECK )
      1. Inspection with the hand-held tester (ECU DATA MONITOR).
   2. Terminals of ECU (See TERMINALS OF ECU )
   3. On-vehicle inspection (See ON-VEHICLE INSPECTION )
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

   END