Starter Specifications
STARTER SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Brush Length | |||
| Standard | .591 (15) | ||
| Minimum | .354 (9) | ||
| Commutator | |||
| Diameter | |||
| Minimum | 1.339 (34) | ||
| Standard | 1.378 (35) | ||
| Runout | .0020 (.05) | ||
| Undercut Depth | |||
| Standard | .028 (.7) | ||
| Minimum | .008 (.2) | ||
| Contact Plate Maximum Depth Of Wear | 0.35 (.9) | ||
| Shunt Coil Resistance | 1.5-1.9 Ohms at 68°F (20°C) | ||
| Spring Load | |||
| Installed Minimum | 2.9 Lb. (1.3 Kg.) | ||
| Installed Standard | 4.8-6.2 Lb. (2.2-2.8 Kg.) | ||