Torque Specifications
TRANSFER TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.Lbs |
|---|---|---|---|
| Transfer At Transfer Adaptor | 24 | 240 | 17 |
| Crossmember At Frame | 72 | 730 | 53 |
| Engine Rear Mounting At Transmission | 65 | 650 | 48 |
| Engine Rear Mounting At Crossmember | 18 | 185 | 13 |
| Protector At Transfer | 18 | 185 | 13 |
| Drain And Filler Plugs | 37 | 380 | 27 |
| Shift Lever Boot Set Bolt | 7.0 | 70 | 61 In.Lbs |
| Shift Control Rod At Transmission Shift Lever Assembly | 13 | 130 | 9 |
| Vehicle Speed Sensor Assembly | 11 | 115 | 8 |
| L4 Position Switch | 37 | 380 | 27 |
| Neutral Position Switch | 37 | 380 | 27 |
| Front Bearing Retainer At Front Case | 11 | 115 | 8 |
| Transfer Upper Cover At Front Case | 18 | 185 | 13 |
| Front Companion Flange Lock Nut | 118 | 1,200 | 87 |
| Rear Companion Flange Lock Nut | 118 | 1,200 | 87 |
| Extension Housing At Rear Case | 12 | 120 | 9 |
| Front Case At Rear Case | 28 | 285 | 21 |
| Shift Shaft Stopper | 19 | 190 | 14 |
| Straight Screw Plug For Shift Fork Shaft | 19 | 190 | 14 |
| Actuator Assembly At Rear Case | 20 | 200 | 14 |
| No. 1 And No. 24WD Position Switches | 37 | 380 | 27 |
| Oil Separator At Front Case | 7.5 | 80 | 69 In.Lbs |
| Oil Pump Body Assembly At Front Case | 7.5 | 80 | 69 In.Lbs |
| Head Screw Plug For Ring Gear | 19 | 190 | 14 |
| Relief Valve At Oil Pump Body | 29 | 300 | 21 |
| Oil Pump Plate At Oil Pump Body | 7.4 | 75 | 65 In.Lbs |