LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Illumination Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check DOME and CUT fuses (See  CIRCUIT INSPECTION   ). 
    1. NG : Replace fuse. 
    2. OK : Go to next step. 
  2. Check illumination light. 
    1. NG : Replace failure light. 
    2. OK : Go to next step. 
  3. Check for harness and connector between each illumination light and passenger side J/B ECU, and battery and each illumination light (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
scientia non olet · About LEMON Manuals