LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Servicing - A/T) >> Lubrication >> Checking Fluid Levels >> Transaxle (Prius)

Transaxle (Prius)

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota RAV4, and 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive vehicle until engine and transaxle reaches normal operating temperature. Park vehicle on level surface and apply parking brake. With engine idling and brakes applied, move gearshift lever through all positions ending in "P" position.
  2. Raise and support vehicle. Carefully remove transaxle fill plug to check level. Fluid level should be within .2" (5 mm) of bottom of fill plug opening. See Fig 1. If fluid is low, fill with proper type fluid until fluid is level with fill plug opening. See RECOMMENDED FLUIDS . DO NOT overfill.
Fig 1: Checking Transaxle Fluid level (Prius)
G00134934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals