Combination Meter ASSY: Overhaul

WARNING: This page is about a different car, the 2004 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE METER HOOD SUB-ASSY (See REPLACEMENT )
REMOVE COMBINATION METER ASSY
1. Remove the screw.
2. Disengage the 2 claws as shown in Fig 1 .
  
  Fig 1: Disengaging Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect connector, then remove the combination meter assy, as shown in Fig 2 .
Fig 2: Disconnecting Connector And Removing Combination Meter Assy
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER GLASS
1. Remove the trip knob.
2. Disengage the 10 claws and remove the window plate.
  
  Fig 3: Disengaging Claws And Removing Window Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the 8 claws and remove the combination meter glass.
Fig 4: Disengaging Claws And Removing Combination Meter Glass
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002