DISARMING THE RS3200 PLUS (except PASSIVE DISARMING)
The system may be DISARMED in several ways. Do one of the following:
Unlock the doors with your key:
Insert the key into the door key switch and turn it toward the rear of the vehicle:
The STATUS Monitor's LED stops flashing. (1) The system is now DISARMED.*
Unlock the doors with the remote control:
Press the unlock button on the remote control. Simultaneously:
The driver's door unlocks. (2)
The vehicle's tail and marker or turn signal lights flash twice. (3)
The vehicle's buzzer chirps twice. Δ
The STATUS Monitor's LED stops flashing. (1) The system is now DISARMED.*
Press the unlock button again within 3 seconds after unlocking the driver's door to unlock the remaining doors.
Use the ignition switch:
Insert the key into the ignition switch, then turn it to ON.
The STATUS Monitor's LED stops flashing. (1) The system is now DISARMED.*
This method of disarming is rarely used. You must be inside the vehicle while the system is armed in order to do it.
* Please note, if the system utilizes your vehicle's engine immobilizer system LED instead of the STATUS MONITOR, the LED will continue to flash.
Δ If your vehicle is equipped with a buzzer.