LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> MR2 C65M >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Ignition System >> Ignition System >> On-Vehicle Inspection >> 3. Inspect Camshaft Position Sensor

3. Inspect Camshaft Position Sensor

  1. Remove the sensor. See CRANKSHAFT POSITION SENSOR .
  2. Using an ohmmeter, measure the resistance between the terminals.
    Fig 1: Specifying Camshaft Position Sensor Resistance
    G01087935Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    If the resistance is not as specified, replace the sensor.

  3. Reconnect the sensor connector.
    Fig 2: Measuring Camshaft Position Sensor Resistance
    G01087936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals