Radar Sensor Check Procedure
- ARM the system.
Press the LOCK button on the remote control or lock the doors with the key.
(Remember, the system will not ARM if any door is open.)
- Wait until the STATUS MONITOR'S LED starts flashing.
The LED will flash 30 seconds after the last door, the trunk or hatch is closed.
- Move inside the vehicle.
When movement occurs inside the vehicle, A WARN AWAY Alarm activates for 20 seconds. If sensor detects 2nd movement within 60 seconds after the 1st warn away alarm trigger, then a regular Alarm activates for 60 seconds.
NOTE: If you find that the system does not perform as expected, contact your Toyota dealer for more information. - DISARM the system to stop the WARN AWAY Alarm.
Press the UNLOCK button on the remote control or use the key to DISARM the system.