LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Highlander Limited, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System Self Diagnostics - 4-Cylinder) >> Self-Diagnostic System >> Intermittent Problem Check (Hand-Held Tester Only)

Intermittent Problem Check (Hand-Held Tester Only)

WARNING: This page is about a different variant/trim than selected.
NOTE: By putting vehicle's ECM in check mode, 1 trip detection logic is possible instead of 2 trip detection logic and sensitivity to detect open circuits is increased. This makes it easier to detect intermittent problems.
  1. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES .
  2. Set check mode. See CHECK MODE CODE RETRIEVAL  under RETRIEVING DIAGNOSTIC TROUBLE CODES.
  3. Simulate conditions of malfunction described by customer.
  4. Check connector and terminal.
  5. Wiggle connector.
scientia non olet · About LEMON Manuals