Remote Transmitter: Programming
WARNING: This page is about a different car, the 2003 Toyota Camry and 2002 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- To begin registering transmitter recognition codes, ensure key is not inserted into ignition switch, driver door is open and in UNLOCKED position and all other doors are closed. Insert and remove key in ignition switch twice within 5 seconds. Within 40 seconds of inserting and removing key, close and open driver door twice. Then insert key back into ignition switch and remove it.
- Within 40 seconds of inserting and removing key, close and open driver door twice. Then insert key back into ignition switch and close driver door. To activate ADD mode, turn ignition switch from LOCK to ON and back to LOCK position one time. To activate REWRITE mode, turn ignition switch from LOCK to ON and back to LOCK position twice at one-second intervals. To activate CONFIRMATION mode, turn ignition switch from LOCK to ON and back to LOCK position 3 times at one-second intervals. To activate PROHIBITION mode, turn ignition switch from LOCK to ON and back to LOCK position 5 times at one-second intervals. Remove key from ignition switch.
- Within 3 seconds of removing key from ignition switch, body control ECU automatically performs LOCK/UNLOCK operation to confirm which mode was selected. LOCK/UNLOCK operation will occur once to confirm that ADD mode has been selected or 2 times at one-second intervals for REWRITE mode. If CONFIRMATION mode is selected, body control ECU automatically performs LOCK/UNLOCK operation 1-4 times at 2-second intervals to inform operator of the number of remote transmitters that are registered. If no remote transmitters have been registered, LOCK/UNLOCK operation will occur 5 times. If PROHIBITION mode is selected, LOCK/UNLOCK operation will occur 5 times at one-second intervals. If PROHIBITION or CONFIRMATION modes are selected, programming mode is completed.
- Within 40 seconds of selecting ADD or REWRITE modes, simultaneously press LOCK and UNLOCK buttons on transmitter to be registered for 1-1.5 seconds. Within 3 seconds of simultaneously pressing LOCK and UNLOCK buttons, press either LOCK or UNLOCK button for more than one second. Within 3 seconds of pressing either LOCK or UNLOCK buttons, body control ECU will automatically perform LOCK/UNLOCK operation once if registration of recognition code is accepted or twice if recognition code has failed. If registration of transmitter code fails, repeat procedure from step 1.
- If additional transmitters are to be registered, ensure registration is performed within 40 seconds of previous transmitter.
- Registration of recognition code procedure will end if 40 seconds has elapsed since door control relay response, driver door is opened, key is inserted into ignition switch, or 4 recognition codes are registered at the same time.