Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a new BCM is being installed:

It must be configured. Refer to "CONFIGURATION (BCM): WORK PROCEDURE ".
Perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to the CONSULT Immobilizer mode and follow the on-screen instructions.
Perform ID registration procedure of low tire pressure warning system. Refer to "ID REGISTRATION PROCEDURE ".

Installation is in the reverse order of removal.