Torque Specification
TORQUE SPECIFICATION
| Part Tightened | N.m | Kgf.Cm | Ft.Lbs |
|---|---|---|---|
| Power Steering Vane Pump (2AZ-FE) | |||
| Vane Pump Housing Rear At Vane Pump Housing Front | 22 | 224 | 16 |
| Pressure Port Union | 69 | 704 | 51 |
| Power Steering Suction Port Union Set Bolt | 12 | 122 | 9 |
| Power Steering Oil Pressure Switch | 21 | 214 | 15 |
| Pressure Feed Tube Assy At Vane Pump Assy | 51.5 | 525 | 38 |
| Vane Pump Assy Set Bolt: Bolt A | 30 (43) | 306 (440) | 22 (32) |
| Vane Pump Assy Set Bolt: Bolt B | 43 | 440 | 32 |
| Power Steering Vane Pump (1MZ-FE) | |||
| Vane Pump Housing Rear At Vane Pump Housing Front | 24 | 245 | 18 |
| Pressure Port Union | 83 | 846 | 61 |
| Power Steering Suction Port Union Set Bolt | 13 | 133 | 10 |
| Pump Bracket Front At Vane Pump Bracket Rear: (Type A Vane Pump) | 43 | 438 | 32 |
| Pump Bracket Front At Vane Pump Bracket Rear: (Type B Vane Pump) | 44 | 449 | 32 |
| Vane Pump Pulley Set Nut: (Type A Vane Pump) | 44 | 449 | 32 |
| Vane Pump Assy Set Bolt | 43 | 438 | 32 |
| Pressure Feed Tube Assy At Vane Pump Assy | 51.5 | 525 | 38 |
| Power Steering Oil Pressure Switch | 21 | 214 | 15 |
| Power Steering Gear | |||
| Control Valve Housing Set Bolt | 21 | 214 | 15 |
| Control Valve Shaft Lock Nut | 24.5 | 250 | 18 |
| Rack Housing Cap | 58.5 | 597 | 43 |
| Rack Guide Spring Cap Nut | 48 (68.5) | 489 (699) | 35 (51) |
| Power Steering Rack At Steering Rack End Sub-Assy | 58.5 (83.5) | 597 (851) | 43 (62) |
| Tie Rod Assy Lock Nut | 74 | 755 | 55 |
| Turn Pressure Tube Union Nut | 11.5 (12.5) | 117 (127) | 8 (9) |
| Rack & Pinion Power Steering Gear Assy Set Bolt And Nut | 70 | 714 | 52 |
| Pressure Feed And Return Tubes At Control Valve Housing | 22.5 (24.5) | 229 (250) | 17 (18) |
| Pressure Feed Tube Clamp Set Bolt | 9.8 | 100 | 86 In.Lbs |
| Return Tube Assy Clamp Set Nut | 9.8 | 100 | 86 In.Lbs |
| Front Stabilizer Bracket | 19 | 194 | 14 |
| Stabilizer Link Assy Set Nut | 74 | 755 | 55 |
| Tie Rod Assy Set Nut | 49 | 500 | 36 |
| Intermediate Shaft Sub-Assy At Control Valve | 35.3 | 360 | 26 |
| Hub Nut | 103 | 1,050 | 76 |
(): For use without SST