Service Data
POWER STEERING SERVICE DATA
| Power Steering Fluid | ||
| Fluid Level Rise: Maximum | 5 mm (0.20 In.) | |
| Fluid Pressure At Idle Speed With Valve Closed | 7,800 - 8,300 Kpa (80 - 85 Kgf/Cm2 , 1,138 - 1,209 Psi) | |
| Steering Wheel | ||
| Steering Effort At Idle Speed: (Reference) | 6 N.M (60 Kgf.Cm, 53 In.Lbs) | |
| Power Steering Vane Pump (2AZ-FE) | ||
| Vane Pump Rotating Torque | 0.27 N.M (2.8 Kgf.Cm, 2.4 In.Lbs) Or Less | |
| Vane Pump Shaft And Vane Pump Housing Seal Clearance: STD | 0.009 - 0.031 mm (0.00035 - 0.00122 in.) | |
| Vane Pump Shaft And Vane Pump Housing Seal Clearance: Maximum | 0.07 mm (0.0028 In.) | |
| Vane Plate Height: Minimum | 7.7 mm (0.303 In.) | |
| Vane Plate Thickness: Minimum | 1.408 mm (0.05543 In.) | |
| Vane Plate Length: Minimum | 11.993 mm (0.47216 In.) | |
| Vane Plate And Vane Rotor Groove Clearance: Maximum | 0.03 mm (0.0012 In.) | |
| Spring Free Length: Minimum | 35.8 mm (1.409 In.) | |
| Power Steering Vane Pump (1MZ-FE) | ||
| Vane Pump Rotating Torque | 0.27 N.M (2.8 Kgf.Cm, 2.4 In.Lbs) Or Less | |
| Vane Pump Shaft And Vane Pump Housing Oil Clearance: STD | 0.027 - 0.054 mm (0.00106 - 0.00213 In.) | |
| Vane Pump Shaft And Vane Pump Housing Oil Clearance: Maximum | 0.07 mm (0.0028 In.) | |
| Vane Plate Height: Minimum | 8.7 mm (0.343 In.) | |
| Vane Plate Thickness: Minimum | 1.4 mm (0.055 In.) | |
| Vane Plate Length: Minimum | 14.991 mm (0.59020 In.) | |
| Clearance Between The Rotor Groove And Plate: Maximum | 0.03 mm (0.0012 In.) | |
| Spring Free Length: Minimum | 32.24 mm (1.2693 In.) | |
| Power Steering Gear | ||
| Steering Rack Runout: Maximum | 0.3 mm (0.012 In.) | |
| Total Preload (Tie Rod Rotating Torque): (Turning) | 0.83 - 3.43 N.M (7.3 - 30.4 Kgf.Cm, 7.3 - 30.4 In.Lbs) | |
| Total Preload (Control Valve Rotating Torque): (Turning) | 1.2 - 1.5 N.m (12.2 - 15.3 kgf.cm, 10.6 - 13.3 In.Lbs) | |