Starter Specifications
STARTER SPECIFICATIONS (4-CYLINDER)
| Application | In (mm) | |||
|---|---|---|---|---|
| Brush Holder Length | ||||
| Standard | .354 (9.0) | |||
| Minimum | .157 (4.0) | |||
| Commutator | ||||
| Length | ||||
| Standard | .130 (3.3) | |||
| Maximum | .158 (4.00) | |||
| Runnout | .002 (.05) | |||
| Snap Ring End Gap | .197 (5.0) | |||
STARTER SPECIFICATIONS (V6)
| Application | In. (mm) | ||
|---|---|---|---|
| Brush Length | |||
| Standard | .610 (15.5) | ||
| Minimum | .394 (10) | ||
| Commutator | |||
| Diameter | |||
| Minimum | 1.142 (29) | ||
| Standard | 1.181 (30) | ||
| Runout | .0020 (.05) | ||
| Undercut Depth | |||
| Standard | .024 (.6) | ||
| Minimum | .008 (.2) | ||
| Magnetic Switch Contact Plate Discard Thickness | .035 (.9) | ||
| Spring Load | |||
| Installed Minimum | 2.7 Lb. (1.2 Kg.) | ||
| Installed Standard | 4.0-5.3 Lb. (1.79-2.41 Kg.) | ||