LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Bench Testing >> Magnetic Switch Test >> Field Coil

Field Coil

  1. Check whether the pull-in coil has an open circuit. Using an ohmmeter, check that there is continuity between terminal No. 50 and terminal "C". See Fig 1. If there is no continuity, check and replace the magnetic switch.
  2. Check whether the pull-in coil has an open circuit. Using an ohmmeter, check that there is continuity between terminals No. 50 and the switch body. See Fig 1. If there is no continuity, check and replace the magnetic switch.
Fig 1: Testing Magnetic Switch
G00297807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals