LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> Tacoma Base, 4D Pickup >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Power Main Relay Circuit >> Inspection Procedure

Inspection Procedure

  1. Check power main relay (Marking: PWR). See  INSPECTION  . 
    1. NG: Replace faulty power main relay. 
    2. OK: GO TO NEXT STEP. 
  2. Check for wire harness and connector between power main relay (Marking: PWR) and body ECU, and battery and power main relay. 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown in problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
scientia non olet · About LEMON Manuals